有关多个版本的LICENSE问题，请高手支招，多谢~

amper

我装了15.51 以及 16.3 两个版本，刚开始还好好的，直接用switch切换下就可以了，后来不知道在注册表里改了什么东西。就用不了了。
; `. \7 I$ Q2 L
5 [) q" E9 q' R7 ~1 {5 u1 F请高手支招一下，在多个版本下，怎么去环境变量里设置这个LICENSE呢？

另外，15.51 以及 16.3 的capture 都用不了了。 15.51 的 capture 每次打开后，提示两个窗口后，就挂了~郁闷中~

8 K% s, e7 w9 J+ y15.51  capture 提示的两个窗口内容如下：
0 [' l1 I4 M1 G
---------------------------
* b' E9 u6 u: _+ A3 a5 jCapture CIS
---------------------------
This design file does not have an associated project (.opj) file. Capture will create a PCB project to reference this design file. If this design file is intended for use for something other than PCB layout, you should press No and create a new project using the New Project Wizard.  Do you want to continue?
+ V# y$ H$ q$ c3 I8 f" c; ?4 m---------------------------
! I; f. l& [! i8 ~0 _; S+ F: E是(Y)   否(N)   
. I2 a/ }& d  M% q5 @% \---------------------------


---------------------------
Capture CIS
---------------------------
This application, Capture CIS, has encounterned following unrecoverable exception, and hence needs to be closed down

EXCEPTION_ACCESS_VIOLATION::
* c9 C4 V7 |0 e4 N3 |One of the threads has tried to read from or write to a virtual address for which it does not have the appropriate access
Do you want to save all the open design now before Capture closes?
+ v4 o5 K( Q" A5 \4 a9 e. |---------------------------
" X; ]; D( k. ~. D是(Y)   否(N)   
---------------------------