求助（LOGIC错误）

panchenqi

由LOGIC发送到LAYOUT时padsnet的错误提示如下：
* Q( ?" |% K. K  {* k" L, gSingle/Zero Pin Net Warnings
) g9 e: ~' w$ [1 C* ?4 w0 j----------------------------
Net ARM_D16 has less than two pins in PCB net list file.
Net ARM_D17 has less than two pins in PCB net list file.
Net ARM_D18 has less than two pins in PCB net list file.
& K% S" j! s& a$ @& l. PNet ARM_D19 has less than two pins in PCB net list file.
Net ARM_D20 has less than two pins in PCB net list file.
Net ARM_D21 has less than two pins in PCB net list file.
Net ARM_D22 has less than two pins in PCB net list file.
' y6 e6 W* o7 |0 v! S# L- [4 o5 ~Net ARM_D23 has less than two pins in PCB net list file.
' a1 b/ }2 G2 J* n9 j0 j) s' i+ DNet ARM_D24 has less than two pins in PCB net list file.
; J8 G3 u( I/ r  I! eNet ARM_D25 has less than two pins in PCB net list file.
" c1 J7 q/ _4 l$ oNet ARM_D26 has less than two pins in PCB net list file.
( [  a* i7 B+ i) l! z, f& }Net ARM_D27 has less than two pins in PCB net list file.
! @7 i& |" C# }& lNet ARM_D28 has less than two pins in PCB net list file.
Net ARM_D29 has less than two pins in PCB net list file.
" p$ n- I# v. e" A' T8 L, uNet ARM_D30 has less than two pins in PCB net list file.
! d, p% \: I/ e" JNet ARM_D31 has less than two pins in PCB net list file.
这个是总线上的
还有个错误
Schematic Connectivity Errors
# f+ C1 D+ e9 e# y1 n-----------------------------
( i: }, A, u" _8 zDangling Connections with a Net Name
8 R2 [. S8 b, o7 f( bAIN1+
AD(MAX125)   X3250  Y3850
AD(MAX125)   X13450 Y7550
& Y5 v' H  j/ I+ _+ j/ S5 d这个可以忽略不管吗？是不是非要用ＯＦＦ　ＰＡＧＥ的方式　我是用导线悬空定义了导线网络名而已

youwenxiang_200

总线没连接好,你要选择NET,看那个网络有没有连通

panchenqi

问题已经解决  主要是自己是由PROTEL导入的元件引起的 看来不能偷懒阿 麻烦