pads的原理图转成cadance

fanliqiang

我用的版本是cadance16.6，怎么把pads的原理图转成cadance
( R+ T6 s  m( R& A

风的缘故

Logic好像转不了ORCAD和Concept

WYL_GW

转完很多要改的，实在搞不懂为啥很多公司喜欢转来转去，如果是要换设计平台，重新抄一遍，一了百了。

superlish

有些公司会设计多种对应不同的软件平台的，对应不同的客户。转来转去怕出问题，花的时间还不如重抄一遍

9527

这个貌似转不了，也没听说有专用的转换软件。

peter1121

16.6最新补丁以及17.2都支持PADS原理图导入了。
Step 1 – Export schematic data from PADS.
' D! i* B; m1 e) ?/ z% nIn DX Designer export your PADS schematic to EDIF 2.0 format using the EDIF Interface:
: }& k: V: t/ h) C1 NNote: If you are using PADS Logic you will need to convert your design into DxDesigner first using the Mentor supplied conversion utilities then you can proceed with step 1 of the conversion process.
Step 2 – Import schematic data to OrCAD Capture.
' r/ Q! G' y* |9 u* XOnce the EDIF file is created, launch OrCAD Capture and use the File >> Import Design option and select the EDIF Tab for Import of your PADS EDIF file:
Your PADS DX Schematic has now been migrated. Some text cleanup may be required.