求RJ45选型手册一份

dqwuf2008

最好有能对RJ45相关的一些参数进行说明的，谢谢
7 U/ S) ]2 G% R+ X- d1 m

超級狗

陰特兒（Intel）1000Base-T 設計指導書（Design Guide）：
! ]; ^. u3 O7 |5 `& g* S: E* X% X
6 g0 x, S0 h8 l* {9 r9 lMagnetics modules for 1000 BASE-T Ethernet are similar to those designed solely for 10/100　Mbps, except that there are four differential signal pairs instead of two. Use the following guidelines to verify specific electrical parameters:

• Verify that the rated return loss is 19 dB or greater from 2 MHz through 30 MHz for 100BASE-TX.
• Verify that the rated return loss is 12 dB or greater at 80 MHz for 100 BASE-TX (the
• specification requires greater than or equal to 10 dB). Verify that the rated return loss is 10 dB or greater at 100 MHz for 1000 BASE-TX (the specification requires greater than or equal to 8 dB).
• Verify that the insertion loss is less than 1.0 dB at 100 kHz through 80 MHz for 100 BASETX.
• Verify that the insertion loss is less than 1.4 dB at 100 kHz through 100 MHz for 1000 BASET.
• Verify at least 30 dB of crosstalk isolation between adjacent channels (through 150 MHz).
• Verify high voltage isolation to 15000 Vrms
• Transmitter OCL should be greater than or equal to 350 μH with 8 mA DC bias.
  ' [; U$ t9 m4 T; p1 u& `

超級狗

$ ?4 z# A9 F4 g
這篇講 RJ-45 含不含耦合變壓器（Magnetics）及 PSE 的差別。

  x" s* g% l3 S+ g( ?

dqwuf2008

超級狗 发表于 2017-8-19 10:52
% J% Q( j9 I  i. P) A/ U這篇講 RJ-45 含不含耦合變壓器（Magnetics）及 PSE 的差別。

1 {" j/ s/ d* D. r6 D

soswelcome

看一看