pads的原理图转成cadance

fanliqiang

我用的版本是cadance16.6，怎么把pads的原理图转成cadance

风的缘故

Logic好像转不了ORCAD和Concept

WYL_GW

转完很多要改的，实在搞不懂为啥很多公司喜欢转来转去，如果是要换设计平台，重新抄一遍，一了百了。

superlish

有些公司会设计多种对应不同的软件平台的，对应不同的客户。转来转去怕出问题，花的时间还不如重抄一遍

9527

这个貌似转不了，也没听说有专用的转换软件。

peter1121

16.6最新补丁以及17.2都支持PADS原理图导入了。
+ h2 h' x: Q& d  L# ?1 }Step 1 – Export schematic data from PADS.
0 v8 C5 [- h$ G9 N: F! qIn DX Designer export your PADS schematic to EDIF 2.0 format using the EDIF Interface:
Note: If you are using PADS Logic you will need to convert your design into DxDesigner first using the Mentor supplied conversion utilities then you can proceed with step 1 of the conversion process.
. h7 ?5 n& ^0 G& m- LStep 2 – Import schematic data to OrCAD Capture.
3 b2 a  Y3 q1 \( A4 _* fOnce the EDIF file is created, launch OrCAD Capture and use the File >> Import Design option and select the EDIF Tab for Import of your PADS EDIF file:
Your PADS DX Schematic has now been migrated. Some text cleanup may be required.
& J( `  @" D- \$ L  f, ?/ A6 f# P