求RJ45选型手册一份

dqwuf2008

最好有能对RJ45相关的一些参数进行说明的，谢谢

soswelcome

看一看

dqwuf2008

超級狗 发表于 2017-8-19 10:52
這篇講 RJ-45 含不含耦合變壓器（Magnetics）及 PSE 的差別。

  p* o- F4 j/ o1 c! I

超級狗

9 l  P4 \7 K* _- z8 g
2 W$ R5 j" g) o- L' a4 {3 g$ ?這篇講 RJ-45 含不含耦合變壓器（Magnetics）及 PSE 的差別。

7 h# j; m2 I% \

超級狗

陰特兒（Intel）1000Base-T 設計指導書（Design Guide）：

Magnetics modules for 1000 BASE-T Ethernet are similar to those designed solely for 10/100　Mbps, except that there are four differential signal pairs instead of two. Use the following guidelines to verify specific electrical parameters:
: a, A$ U; ^  ]) Y& L

• Verify that the rated return loss is 19 dB or greater from 2 MHz through 30 MHz for 100BASE-TX.
• Verify that the rated return loss is 12 dB or greater at 80 MHz for 100 BASE-TX (the
• specification requires greater than or equal to 10 dB). Verify that the rated return loss is 10 dB or greater at 100 MHz for 1000 BASE-TX (the specification requires greater than or equal to 8 dB).
• Verify that the insertion loss is less than 1.0 dB at 100 kHz through 80 MHz for 100 BASETX.
• Verify that the insertion loss is less than 1.4 dB at 100 kHz through 100 MHz for 1000 BASET.
• Verify at least 30 dB of crosstalk isolation between adjacent channels (through 150 MHz).
• Verify high voltage isolation to 15000 Vrms
• Transmitter OCL should be greater than or equal to 350 μH with 8 mA DC bias.
  2 F9 C) {3 ?- m$ w7 D) k; V

2 `% q. ~: m& o& E& }