|
|
, c9 \" x1 M1 l; j& \* g6 K) A不確定是不是這個問題造成的，但可以參考一下這些資料。4 F, M0 @3 e5 m. Y w" d3 Z+ o0 e
5 |) }8 T1 k4 z+ s& I
下面這段話是肥死卡好（Freescale）的技術文檔節錄下來的，講得一針見血、但內容較雜（ 不只討論這個問題），我給你另一篇 ATMEL 的技術文檔，它專門討論 MCU 的 Start-up Time，淺顯易懂、還有一些電路上的建議！
8 a7 A4 H" ?0 f0 t3 c0 z1 Q) \9 o( {, e$ t7 U
Long Start-Up Time) n5 X; c( k7 a |, N8 Q0 e
A long start-up time is usually a more common problem with low-frequency crystals, since they tend to start much more slowly than high-frequency crystals. One of the causes of a long start-up time is weak loop gain. Oscillator start-up times will also be affected by the rise time of the power supply. When the power supply has a sharp rise time, the crystal will experience an energy impulse that will usually make it start faster than it would using a power supply with a slow rise time.
( r7 f- Y) ^, k5 Q9 x6 Q) c! c/ E) V
 & i7 W1 w4 ]' W4 D& [) ~4 E! g$ G; o
|
|
/1 
发表于 2015-6-24 20:29
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
微信
收藏
支持！
反对！
发表于 2015-6-25 09:36
楼主
发表于 2015-6-26 08:42
