原理图导网时出现[ALG0042]与[ALG0045]错误

pengsandy

请高手提点一下，这只是一部分，还有很多，不知什么问题？
% S- i9 D. i# _9 L [ALG0042] Duplicate Reference Designator C42: SCHEMATIC1, UART_RJ45_ALM_RTC (7.25, 4.00).
3 `2 R2 m* n: k3 I, O#59 Error   [ALG0042] Duplicate Reference Designator C31: SCHEMATIC1, SATA_Pannel_USB (2.65, 3.80).
0 K" B, q  S/ u$ Z$ Z9 ~#60 Error   [ALG0042] Duplicate Reference Designator R12: SCHEMATIC1, PHY (2.90, 1.75).
% Y* J) N5 f( g6 l# H#61 Error   [ALG0042] Duplicate Reference Designator C10: SCHEMATIC1, POWER (3.55, 3.85).
#62 Error   [ALG0042] Duplicate Reference Designator C43: SCHEMATIC1, UART_RJ45_ALM_RTC (2.65, 4.35).
#63 Error   [ALG0042] Duplicate Reference Designator R23: SCHEMATIC1, UART_RJ45_ALM_RTC (14.20, 2.35).
, `8 K4 V. m" K; }0 W' Y#64 Error   [ALG0042] Duplicate Reference Designator C32: SCHEMATIC1, SATA_Pannel_USB (2.65, 3.90).
% |1 o. v# w2 i! i* t+ |#65 Error   [ALG0042] Duplicate Reference Designator C21: SCHEMATIC1, POWER (3.35, 5.25).
#66 E
+ D; n! B/ J* k3 Wrror   [ALG0042] Duplicate Reference Designator C1: SCHEMATIC1, DDR CONTROLLER (2.00, 4.95).
#67 Error   [ALG0042] Duplicate Reference Designator R13: SCHEMATIC1, FLASH (2.90, 6.75).
3 L$ f/ r" [/ O( V( _% e' f#68 Error   [ALG0042] Duplicate Reference Designator C11: SCHEMATIC1, POWER (9.10, 3.85).
#69 Error   [ALG0042] Duplicate Reference Designator C22: SCHEMATIC1, POWER (8.20, 5.25).
9 J5 _. A6 K2 D, `9 i#70 Error   [ALG0042] Duplicate Reference Designator C77: SCHEMATIC1, VAOUT (7.75, 10.30).
5 M8 D% f% s$ \2 a7 h) c#71 Error   [ALG0042] Duplicate Reference Designator C44: SCHEMATIC1, UART_RJ45_ALM_RTC (2.95, 4.35).
* Z# m; x+ r) Q( @) X: P9 w$ f8 U#72 Error   [ALG0054] Conflicting number of parts per package (1) for U1: SCHEMATIC1, POWER (8.45, 1.30)
#73 Error   [ALG0054] Conflicting number of parts per package (6) for U1C: SCHEMATIC1, SYSTEM POWER (9.95, 1.60)
! x/ V- k2 S5 L4 k! o/ f#74 Error   [ALG0045] multiple pin 1's which have different nets connected for R25: SCHEMATIC1, PHY (3.35, 4.20).
# r" h. X, p" Q, s0 K5 `6 Z" n#75 Error   [ALG0045] multiple pin 2's which have different nets connected for R25: SCHEMATIC1, PHY (3.35, 4.20).
#76 Error   
[ALG0045] multiple pin 1's which have different nets connected for R14: SCHEMATIC1, POWER (10.60, 4.45).
#77 Error   [ALG0045] multiple pin 2's which have different nets connected for R14: SCHEMATIC1, POWER (10.60, 4.45).
#78 Error   [ALG0045] multiple pin 1's which have different nets connected for C23: SCHEMATIC1, POWER (8.90, 5.25).
#79 Error   [ALG0045] multiple pin 2's which have different nets connected for C23: SCHEMATIC1, POWER (8.90, 5.25).
#80 Error   [ALG0045] multiple pin 1's which have different nets connected for C3: SCHEMATIC1, DDR CONTROLLER (2.00, 5.65).

indenpendence

6楼说的很好

danse

pengsandy 发表于 2011-11-7 15:43
: Q( O+ _& j) G2 V4 @; X' U是的，问题己解决，谢谢

0 A* f3 {: v! T6 D这个问题其实有两种情况（主要说第2种）:
      1、在同一个元件里确实有两个编号相同的PIN，除了POWER引脚外。
  A) f, g4 ^# w    2、一个元件里有多个子元件，一般电源引脚我们定义为POWER属性，还给他起一个PIN名，如：POWER 或GND。如果你联接的时候不是联接到网络名相同的POWER 或GND，则报错：#1 Error   [ALG0045] multiple pin 3's which have different nets connected for U36: SCHEMATIC1, PMSP3_1POWER (215.90, 193.04).
* ]1 x3 c" {+ K. H8 ?. _9 g  V              Check for incorrect packaging of all devices in U36. 你只要改一下引脚步名，就可以解决了。

要学习PMSM SVPWM控制原理的朋友请一起去看看 //shop57039393.taobao.com/

pengsandy

是的，问题己解决，谢谢

jacklee_47pn

有二個 Ｕ１５Ｇ 的元件，另外 Ｕ１５ 裡面 Ｂ１１ 的管腳有重複。

pengsandy

处理得差不多了：还有三个问题
C:\Cadence\SPB_16.2\tools\capture\allegro.cfg

9 V5 e& B; `5 oSpawning... "C:\Cadence\SPB_16.2\tools\capture\pstswp.exe" -pst -d "D:\h15c01_v120.dsn" -n "D:\allegro netlist" -c "C:\Cadence\SPB_16.2\tools\capture\allegro.cfg" -v 3 -j "PCB Footprint"
#1 Error   [ALG0042] Duplicate Reference Designator U15G: SCHEMATIC1, PAGE8 (76.20, 93.98).
) X1 G, a0 k8 g+ H#2 Error   [ALG0045] multiple pin B11's which have different nets connected for U15: SCHEMATIC1, PAGE8 (76.20, 93.98).
              Check for incorrect packaging of all devices in U15.
- @  h+ ~9 y- i0 \& ~/ ?#3 Aborting Netlisting... Please correct the above errors and retry.

Exiting... "C:\Cadence\SPB_16.2\tools\capture\pstswp.exe" -pst -d "D:\h15c01_v120.dsn" -n "D:\allegro netlist" -c "C:\Cadence\SPB_16.2\tools\capture\allegro.cfg" -v 3 -j "PCB Footprint"

" r' S1 X# T- H, g% c
*** Done ***
就是不让出网表，头痛

jacklee_47pn

[ALG0042] 原理圖裡面，有相同編號的元件。
" I# c9 p/ q# L9 J9 \/ l) \' }# S[ALG0045] 一個元件封裝裡面，有相同的PIN。