双面板灌铜问题求教

yangjijun · 发表于 2009-2-7 08:55

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

最近做了一块新的双面板的板子,在灌铜出现如下记事本信息,可以灌铜:

THERMAL RELIEF ERRORS REPORT -- QS-MSPD03-A1.pcb -- Sat Feb 07 06:51:27 2009

   Drilled pads with                   Nondrilled pads with
less than 50% thermal extensions    less than 50% thermal extensions
Report of Thermal Spokes Generator.
On Bottom:
                                    CON1.59 (101.294, 22.81894) # = 0
                                    J1.6 (1.35567, 81.92433) # = 0
                                    J1.5 (1.35567, 73.32433) # = 0
On Top:
                                    U3.28 (38.24533, 6.996) # = 0
                                    U2.91 (48.22467, 46.587) # = 1
                                    U2.33 (37.29967, 29.662) # = 0
                                    U2.30 (36.09967, 29.662) # = 0
                                    U4.38 (7.21033, 33.401) # = 0
                                    U2.115  (43.29967, 55.912) # = 1
                                    C121.1  (24.97, 61.60933) # = 1
                                    C65.2 (31.38433, 61.60933) # = 0
                                    C34.2 (26.72167, 61.60933) # = 0
                                    CN8.1 (77.11, 45.22633) # = 0
                                    C26.1 (96.876, 50.80367) # = 1
CN1.2 (92.893, 81.84633) # = 1
                                    C88.1 (38.54833, 65.999) # = 1
                                    C18.1 (83.90833, 14.99367) # = 1
                                    R12.2 (82.59033, 9.459) # = 1
                                    C107.2  (108.83067, 24.37833) # = 0
                                    C116.1  (104.612, 23.685) # = 1
                                    CN7.29  (114.48167, 46.79733) # = 0
                                    CN6.16  (73.89233, 27.71833) # = 0
                                    R117.2  (97.751, 34.52467) # = 0
                                    Q11.2 (52.23133, 65.47267) # = 1
                                    C91.1 (65.06753, 36.39501) # = 1
                                    C57.2 (57.362, 22.507) # = 0
                                    C113.2  (71.72767, 30.46967) # = 1
                                    U7.7 (21.968, 23.83633) # = 0
                                    R20.2 (100.10933, 8.49433) # = 0
                                    C67.2 (21.47, 20.647) # = 0
                                    R127.2  (97.876, 36.15167) # = 0
                                    C80.2 (32.66633, 17.85967) # = 0
                                    CN6.7 (73.89233, 23.21833) # = 0
                                    C40.2 (17.489, 50.371) # = 0
                                    CN8.21  (77.11, 55.22633) # = 0
                                    C39.2 (109.961, 20.211) # = 0
                                    CN8.26  (77.11, 57.72633) # = 1
                                    C21.1 (69.32467, 6.146) # = 0
                                    D2.2 (93.05307, 8.08817) # = 1
                                    C51.2 (53.16633, 47.10233) # = 0
                                    ZD1.2 (100.73467, 18.71433) # = 1
                                    C89.2 (49.505, 61.53967) # = 1
                                    R59.1 (39.99533, 63.06367) # = 1
                                    C82.1 (37.22967, 63.06367) # = 0
                                    C81.1 (38.589, 63.06367) # = 0
                                    R64.1 (35.84823, 63.06357) # = 0
                                    R6.2 (19.39533, 61.16) # = 1
                                    C96.2 (50.354, 79.19) # = 1
                                    C53.2 (17.92133, 45.94567) # = 0
                                    C86.2 (41.31433, 63.06367) # = 1
                                    C87.1 (45.903, 60.085) # = 1
                                    CN8.27  (79.41, 43.27633) # = 0
                                    C124.1  (103.66167, 84.20467) # = 0
                                    U8.3 (98.70567, 86.39) # = 0
                                    C45.2 (14.993, 46.32267) # = 0
                                    U4.13 (8.21033, 13.801) # = 0
                                    R33.1 (16.271, 52.34533) # = 0
                                    C27.2 (17.80433, 55.72233) # = 0
                                    C78.2 (42.75068, 59.99373) # = 0
CN5.1 (3.179, 37.31367) # = 1
                                    C62.2 (57.127, 5.22033) # = 0
                                    U3.52 (57.44533, 6.996) # = 0
                                    U3.41 (48.64533, 6.996) # = 1
                                    U3.46 (52.64533, 6.996) # = 0
                                    U2.104  (48.22467, 51.787) # = 1
                                    C75.2 (40.14312, 59.99373) # = 0
                                    U2.130  (37.29967, 55.912) # = 0
                                    U2.175  (21.97467, 48.587) # = 1
                                    U2.168  (21.97467, 51.387) # = 1
Total Drilled pads: 2             Total Nondrilled pads: 67
Report of Violating Thermal Spokes Remover.
On Top:
                                    U2.16 (30.49967, 29.662) # = 0
                                    U2.91 (48.22467, 46.587) # = 0
                                    U2.101  (48.22467, 50.587) # = 0
                                    U2.104  (48.22467, 51.787) # = 0
                                    U2.115  (43.29967, 55.912) # = 0
                                    U2.121  (40.89967, 55.912) # = 1
                                    U2.168  (21.97467, 51.387) # = 0
                                    U2.175  (21.97467, 48.587) # = 0
Total Drilled pads: 0             Total Nondrilled pads: 8
请教高手原因?