如何读入SKILL目录下子文件夹中的SKILL

年薪十块 · 发表于 2008-8-7 19:20

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

allegro.ilinit 如下：

; setSkillPath(buildString(append1(getSkillPath() "C:\Cadence\skill")))
;setSkillpath(buildString(appendl(getSkillPath() 'C:\Cadence\skill)))
;setSkillPath(strcat(getShellEnvVar("skill_path") "-/../"))

setSkillPath(append(list("." getShellEnvVar("skill_path")) getSkillPath() ) )
;
load("Unit_and_Grid.il")
load("_SetGrid.il")
;

我试了几种方法都不行，现在的只能读根目录下的.IL 文件

ahfong2006 · 发表于 2008-8-8 08:45

要用个 setSkillpath 函数把自己的skill文件存放目录加到skill path 里面去。
参看注释掉的那三条语句

年薪十块 · 发表于 2008-8-8 09:21

谢谢楼上的回帖，不过第三句也只是读到根目录下的程序啊

deargds · 发表于 2008-8-8 09:30

setSkillPath(buildString(append1(getSkillPath() "C:/Cadence/skill")))
SKILL 放到C:/Cadence/skill下

年薪十块 · 发表于 2008-8-8 09:47

大虾，还是不行啊！

这是我放SKILL的路径
C:\Cadence\skill\grid

这是我的allegro.ilinit
; setSkillPath(buildString(append1(getSkillPath() "C:\Cadence\skill")))
;setSkillpath(buildString(appendl(getSkillPath() 'C:\Cadence\skill)))
;setSkillPath(strcat(getShellEnvVar("skill_path") "-/../"))

; setSkillPath(append(list("." getShellEnvVar("skill_path")) getSkillPath() ) )
setSkillPath(buildString(append1(getSkillPath() "C:/Cadence/skill")))
;
load("Unit_and_Grid.il")
load("_SetGrid.il")
;

这是报的错，我先是LIB的环境，后来切到BRD的环境。

E- allegro: Can't open journal file
E- *Error* load: can't access file - "Unit_and_Grid.il"
E- *Error* load: can't access file - "_SetGrid.il"
Opening existing drawing...
Revising data for compatibility with current software.
Opening existing drawing...
Revising data for compatibility with current software.
W- (SPMHDB-214): Allegro PCB Design L opening an Allegro Expert design.
W- (SPMHDB-213): DRC set to "out of date". This product supports a different DRC set than last product used on drawing.
E- Command not found: Unit_and_Grid
E- Command not found: Unit_and_Grid
E- Command not found: Unit_and_Grid
Command >

我的目的是不但能够读入SKILL目录下的SKILL，也能够读入SKILL目录下子文件夹下的SKILL