导出ODB++ 提示报警

ZMS_CHINA

WARNING: Since the starting (6.7322835,7.6968501)(mm) and the ending (6.7322831,7.6968504)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.
8 E- n- a- F) P* y5 i
: g' v/ D  U& v  [- f6 eWARNING: Since the starting (1.3133467,3.0012447)(mm) and the ending (1.3133473,3.0012450)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.
2 M5 s8 O4 w& F! V& y! d7 J
8 k) i! r# h& A, w: P/ O: t报警提示的坐标都是在原点附近的，我尝试着把原点设置到-100，-100的位置，报警的坐标也就涨到10，10的样子，不像是PCB上面的线，不知道哪边设置有问题
2 z9 N5 \+ V& c7 m% m. B9 j

zorro123

thanks