|
|
leese2002 发表于 2011-9-9 08:22 ![]()
0 L$ h4 _- G: K3 s+ ^3 wVisualCAM.v16.1.SR3做什么用的？？
VisualCAM is a powerful Manufacturing Engineering CAM software package that addresses the wide-ranging needs of EDA professionals. For the PCB layout engineer VisualCAM offers a complete set of Design Verification features. If you are a Bare-Board PCB engineer there is a full range of Manufacturing Verification and Tooling features available. Finally VisualCAM rounds out its capabilities by: k; i! G! N G2 O
offering Loaded-Board PCB engineers an array of Assembly Processing capabilities not typically found within competitive products.# T% i/ G' M0 A2 t$ I, L
Design Verification: Verification of your design data is a critical step before submitting your job for production. Today’s product complexities require PCB layout engineers to push spacing limits while laying out their board designs. Tighter tolerances can mean more expensive bare-boards,and thus the risks of scrap become more expensive as well–especially if the problems are not identified until after assembly. VisualCAM provides you with a Dynamic DfM Analysis Suite that offers 75+ Design and Manufacturing checks. A blend of traditional design related checks,like track-to-track and track-to-pad,as well as manufacturing checks,like acid traps and copper slivers,can be found within VisualCAM. Rounding out your design verification experience is VisualCAM’s graphical netlist comparison with pin-point error detection. Compare your data set against any IPC-D-356 netlist,or use netlist information extracted from ODB++ or PADS ASCII files,and quickly zoom to any shorts or opens in the workspace. |
|
楼主: e123wgz
[复制链接]
/1 
发表于 2011-8-25 17:29
楼主
