求救：ORCAD里无法自动增加off-page connector

anglehut

执行Tools/Annotate..
0 K. Z3 v% ]9 }: ^# C! u- e选择"Add Intersheet References”
8 u# ]1 c! q! x. p9 c勾选"Place On Off Page Connectors"
' E1 q% b/ s/ u# ]' M! OOK之后，提示以下信息
==Adding=InterSheet=References=========================
WARNING #18001 Off Page Connector BSPI_MISO on Page 02 MCU has no Intersheet References.
% j8 D7 A  j, g8 b+ }1 \WARNING #18001 Off Page Connector BSPI_CLK on Page 02 MCU has no Intersheet References.
WARNING #18001 Off Page Connector BMC513-RX on Page 02 MCU has no Intersheet References.
& @7 e$ ], X$ q$ v8 I1 s0 S==Adding=InterSheet=References=Complete================
原理图上没有自动增加分页转接符号，请问这是什么问题？

way

不放页码数同样有连接性,此问题前也碰到过,没办法解决.