kill load("quick_artwork.il") 加载不成功

mjchen

Command > skill load("quick_artwork.il")
E- *Error* load: can't access file - "quick_artwork.il"

rockymohuan

mjchen 发表于 2014-2-10 15:13
skillDir = (simplifyFilename "C:/adiva/interface")
(setSkillPath (append (list "./" skillDir) (getS ...

Command > quickart 即可~
可以编辑下文件，看它的执行命令。。。

yixin

c_hm_load.il  ohio_license_config.il   这两个是什么意思？请问有没有自动给NET包地的SLILL   

sp507

这是什么skill~~

這侽孓譙悴丶

在命令栏里直接输入这个skill在Allegro中的执行命令，然后回车就行了！最好把这个skill在Allegro中的执行命令以菜单的形式加载到软件里去 ，像Allegro中的菜单命令一样，一点击菜单命令就可以执行了，快速方便！

蓝风紫心

Command > quickart 即可~

mjchen

skillDir = (simplifyFilename "C:/adiva/interface")
(setSkillPath (append (list "./" skillDir) (getSkillPath)))
(load "ADIinterface.il")
(load "updatemenu.il")
(load "hl_ntp.il")
(load "skill.il")
(load "cot.il")
(load "align_sym.il")
(load "DRC_WALK.il")
(load "fform.il")
(load "find_dlines.il")
(load"c_hm_load.il")
(load"x_mc_ro_text.il")
(load"quick_artwork.il")
(load"ohio_license_config.il")
(axlShell "alias SF12 update menu")
(axlShell "alias F12 (readError)")
(load "drc_walk.il")
caet = "C:/adiva"
(axlSetVariable "CAETbin" (simplifyFilename "C:/adiva/bin/"))
(axlSetVariable "CAETdata" (simplifyFilename "C:/adiva/data/"))
(axlSetVariable "CAEThelp" (simplifyFilename "C:/adiva/manual/"))
(updateMenu)
; DstCAM350() is the CAM350 Cross Probe Startup
foreach(x '(DstCAM350 DstStop DstOn DstOff)
(putprop x "D:\\spb\\pcbenv\\DstCxi.il" 'autoload))
(load "C:/Documents and Settings/Administrator/Application Data/SPB_Data/pcbenv/eemAdfiSetup.il") ; Agilent EEsof EDA, Allegro DFI load