导出ODB++ 提示报警

ZMS_CHINA

WARNING: Since the starting (6.7322835,7.6968501)(mm) and the ending (6.7322831,7.6968504)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.
+ t* x" \+ e1 r% ]9 i; N7 V) Q% {
8 G0 V  s6 q% M$ u+ p8 h, ZWARNING: Since the starting (1.3133467,3.0012447)(mm) and the ending (1.3133473,3.0012450)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.

报警提示的坐标都是在原点附近的，我尝试着把原点设置到-100，-100的位置，报警的坐标也就涨到10，10的样子，不像是PCB上面的线，不知道哪边设置有问题
* d0 D$ H1 n4 B+ P3 t4 W

zorro123

thanks