原理图中改过的错误，PCB前标时显示还有，是怎么回事

laobei1986

原理图封装后报了两个ERROR，然后修改，再次编译、封装，两个ERROR没有了。在对PCB进行前向标志时显示未成功，查看“Forward Annotation.txt”文件，里面显示如下红字所述，和原理图封装报的错一样，明明改过了，怎么还是有呢？
, W" H$ Y+ L4 r# f& a
ERROR Block TOP!POWER9 Page 3, Symbol XCMP2352: The required symbol is not in the Parts DataBase.
     This is a MVT040 symbol
# z! F/ P& A. O: s4 b4 f      with a reference designator U73
      plus a QFN19-13.46x33.02mm Part label and a MDT040A0 Part name
2 N$ S1 S: D# q/ B/ R/ k9 n      using Part number MDT040A0.

1 D$ f9 F4 E& \# D6 R  W$ d; z
% ]: y" b8 g" YERROR Block TOP!POWER9 Page 3, Symbol XCMP2351: The required symbol is not in the Parts DataBase.
, W; Z' R7 g, A' Y     This is a MVT040 symbol
' t' W' R4 f* u% R7 B' m      with a reference designator U79
      plus a QFN19-13.46x33.02mm Part label and a MDT040A0 Part name
, u9 ?: f, ^. H0 t: }      using Part number MDT040A0.
& [$ k# P1 H. j+ O( m. J
- O5 m" l% v" |: p$ I  n/ A# u4 ?
( M0 \1 ]; @7 I  `     2 packaging errors have been found.
! ], l" H% ]: f3 Z4 g5 P      For those errors that only involve the application of wrong
% k$ I, n2 W& n2 a      pin numbers, either repackage the schematic by hand or
      simply remove at least one pin number per reference designator
- D. }8 {+ k8 P* D: H- G; \& ]$ e      to enable automatic packaging when you run this
0 k% p: M5 l5 Y: O$ k      procedure again.


: i' Q. i3 T  D& d' L' y* J

     DataBase Load is being terminated with 2 errors and 4197 warnings.
1 h, R/ k- v1 F4 a7 w" q      Logic Data has NOT been Compiled.
& c. A. w+ o; G7 U3 M
' V+ z! f- k' _( i' Y7 R

laobei1986

9527 发表于 2014-10-9 08:47
楼主看看这个地方是否有正确设置？

多谢，是库没更新造成的。
. ?# d& r" i0 R

laobei1986

hardy 发表于 2014-10-8 22:12
The required symbol is not in the Parts DataBase看下有没有这个符号的part

多谢，是库没更新。
' U. ?* j& t4 |$ r4 e* C

9527

楼主看看这个地方是否有正确设置？
' C& |9 ~* A$ |$ [' r


8 b3 ?1 g; L+ ?& Q

hardy

The required symbol is not in the Parts DataBase看下有没有这个符号的part