|
EDA365欢迎您!
您需要 登录 才可以下载或查看,没有帐号?注册
x
map的时候总是报错 :ERROR : Place : 1155 - A clock IOB/MMCM clock component pair have been found MMCM site pair. The clock IOB component <xx>is placed at site <M22>. the corresponding MMCM component <XXX> is placed at site <MMCM_ADV_X0Y7>.The clock IO can use the fast path between the IOB and the clock manager if u$ ^, I% c H& ^8 ^
a) the IOB is placed on a local clock capable IOB site in the same horizontal clock region pair as the MMCM site (fastest dedicated path),
0 q' U* d" f/ e/ R- U" c/ r" }or b) the IOB is placed on a global clock capable IOB site which has a dedicated fast path to all MMCM sites.
- j6 z' H" g `" \* m2 C5 U
1 [8 ~8 [% m' v5 G0 RISE建议用 CLOCK_DEDICATED_ROUT = FALSE 来使error变为warning。
) a: g; g) f2 _3 Z; S( c& B; o9 ~+ w3 o
请问,是否还有别的方法?
& `( l& s' R% l, Q0 z0 b/ ^
+ I! v7 J0 }6 j- @+ u$ M有的情况即时使用CLOCK_DEDICATED_ROUT = FALSE,还会出现:
1 c& H# Y& i5 |physDesignRules:2053 - unsupported MMCM_ADV configuration. The signal xx on the CLKIN1 pin of MMCM_ADV comp xxx with COMPENSATION mode ZHOLD must be driven by a clock capable IOB.
2 U; S: u) y9 m/ W+ Q2 l+ J" ?' ^% s) z, G; Z: `# t2 c
请教,这个如何解决?
1 T1 o; L, i& O' e因为pcb已经做好,pin的位置都固定了,没法把时钟信号重新连dao clock capable IOB的pin上了。
) {8 L0 O4 s' R8 ?3 U8 |# g2 @# }0 \ Z+ n% y& V
谢谢 |
|