元件不能导入的问题

IO357 · 发表于 2009-7-24 12:44

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

Allgero 15.2导入网络时，如何将器件添加进去?
有netlist.txt  及每个库的DEVICE.txt 及库文件；在Place-〉mannally中可看到自己的元件，导入时也选了Append device file log 但导入后还是没有元件.QuickPlace中显示元件数为0.

ERROR: Property 'RELATIVE_PROPAGATION_DELAY' value 'PCI_S:G:J1.C5:U7.22:0 MIL:~150 MIL' error: Can't create PINPAIR GROUP because the pins are not on~the same XNET..
都是类似的错误.
===========================================================
Total Device File Warnings =  0.
Total Device File Errors =  0.
===========================================================
Total Combined Netlist and Device File Warnings =  49.
Total Combined Netlist and Device File Errors =  77.
===========================================================
错误是由什么引起的？
网络表及库文件是从.brd文件导出的，在新文件中导入问题都这么多,该怎么做呢？问题出在哪？