Effective Z0 与 Impedance Z0 为什么不一样？

Dz久久 · 发表于 2011-10-16 16:00

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

各位大虾，小弟想请教一个问题。
在我用HyperLynx仿真的之前，设置好了目标阻抗Z0，当用Terminator Wizard计算匹配电阻的时候，实际的有效电阻（Effective Z0）却比目标阻抗（Impedance Z0 ）小，不知道这是为什么？

sdody · 发表于 2011-10-17 11:55

The average metal Z0 is not the same as the effective impedance of a trace. The Average Zo is Average impedance of the whole trace
The "effective Z0" is a figure that attempts to show by how much the selected nets actual characteristic impedance is effectively lowered by the presence of IC capacitance along the net and associated nets. This value can be used as a guide when choosing termination resistances, since for nets that are significantly loaded by IC capacitance, the proper termination value is almost always lower than suggested by the nets actual Z0.

走线的impedance（Z0) 受到IC impedance 影响= Effective Impedance.
Effective Impedance 一般比走线Impedance 低

Dz久久 · 发表于 2011-10-25 19:54

sdody 发表于 2011-10-17 11:55 & g, _$ D1 }+ a
The average metal Z0 is not the same as the effective impedance of a trace. The Average Zo is Avera ...

多谢啊~{:soso_e100:}

		自动登录	找回密码
密码			注册

[HyperLynx] Effective Z0 与 Impedance Z0 为什么不一样？

EDA365欢迎您！

推荐内容 /1