灌铜时出现如下提示，怎么改？

zxinli · 发表于 2009-4-16 19:44

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

如题：

   Drilled pads with                   Nondrilled pads with
less than 50% thermal extensions    less than 50% thermal extensions
Report of Thermal Spokes Generator.
On Bottom:
                                    C151.2  (-121.23, 6795.7) # = 1
                                    U38.3 (657.87, 6853.54) # = 0
                                    C35.2 (1812.02, 3747.48) # = 1
                                    U8.13 (2640, 4440.77) # = 1
                                    U35.36  (308.35, 5110.45) # = 1
                                    U27.9 (1126.28, 4996.87) # = 0
                                    C114.2  (-511.46, 2505.14) # = 0
虽然知道这个没什么太大影响，    但我没遇到过，请教各位大虾，是我哪里设置的不够？
谢谢！

jimmy · 发表于 2009-4-16 22:28

如题：
( e% O# `4 g) Z2 y8 f3 f
- X0 w% q7 Q: z5 l7 d# Z. e    Drilled pads with                   Nondrilled pads with* _) k7 O; x' `7 P1 [
less than 50% thermal extensions    less than 50% thermal extensions) n$ e6 [2 F1 P! m
Report of Thermal Spokes Generator.) D: r* `# B; K
On Bottom:
8 J( \" w' W: r  ...
3 {/ W  Z' b: j/ {- Y2 @- V' [zxinli 发表于 2009-4-16 19:44