ORCAD 生成网络表出错

jiecket · 发表于 2011-12-24 13:44

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

本帖最后由 jiecket 于 2011-12-24 16:27 编辑

yh\allegro/pstxnet.dat
ERROR(SPCODD-413):
Error at line 6167 in file i:\yh\allegro/pstxnet.dat. Reference designators inconsistent in xprt and xnet files. Reference Designator in xprt file: TP3. Reference Designator in xnet file: TP5. Schematic Instance

imax53_mainboard.\main board\(sch_1):i173499@imax53.\test pad.normal\(chips) (MODULE: IMAX53_MAINBOARD; PART: TEST PAD).

ERROR(SPCODD-383): Error at line 6167 in file i:\yh\allegro/pstxnet.dat. Error loading the net list file

#27 ERROR(ORCAP-36026): Unable to read logical netlist data.

Exiting... "D:\Cadence\SPB_16.5\tools\capture\pstswp.exe" -pst -d "i:\yh\imax53_mainboard.dsn" -n "i:\yh\allegro" -c "D:\Cadence\SPB_16.5\tools\capture\allegro.cfg" -v 3 -l 31 -s "" -j "

CB Footprint" -hpath "HPathForCollision"
INFO(ORCAP-32005): *** Done ***

原来的没有问题，就这周五我把14PIN的JTAG接口改成 20PIN之后突然出现这个错误，无法生成网络表，没改之前的也是出现这个问题，有没有哪位解答下