CPW在HFSS仿真时端口设置问题

燃烧吧小年轻 · 发表于 2016-11-23 23:07

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

请教大神门在利用HFSS仿真由CPW构建的功分器怎么设置端口呢，用波端口还是集总端口，如果用集总端口怎么画积分线呢？端口是画在槽线上还是信号线上呢？如果用波端口怎么画积分线？
本人尝试波端口和集总端口可是每次仿真都说提示警告：Portrefinement, process hf3d: '1' conductors touch lumped port '1', typically alumped port contains 2 conductors. Please verify conducting boundaries and objects are correctly assignedand touch the port. If a Radiationboundary touches the port and it is desired for use during the port solution,select 'Use Radiation Boundary on Ports' under the Advanced tab in the SolutionSetup.
不明白是什么原因，我也没有设置辐射边界啊。