TimeQuest_User_Guide

lc1234 · 发表于 2015-1-6 10:07

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

ction 1: Getting Started

      This first section is meant to get a user up and running as quickly as possible.  It touches
on multiple topics that are detailed later, and is meant for application and a quick understanding.
That being said, I think all users should look through this section and make sure they understand
it.
      The last portion of Getting Started covers analyzing results, which is an integral part of
entering constraints.  One can't enter core timing or I/O constraints without being able to read the
analysis reports, so it is recommended to read that section in conjunction with the information at
the beginning.

Quartus Setup
      Within Quartus, there are a number of quick steps for setting up your design with
TimeQuest.  These are accessed through the pull-down menu Assignments -> Settings:

1)  Along the left panel, select Timing Analysis Settings and select the "Use TimeQuest…" radio
button.  The Classic Timing Analyzer is the old timing analysis engine, which is not
recommended for any new designs or architectures, and will eventually become obsolete.

2)  Select TimeQuest Timing Analyzer in the left panel.  The screenshot should look like below,
whereby the user can add a new SDC file.  SDC stands for Synopsys Design Constraint, which is
the format TimeQuest uses, along with many other tools.  If no .sdc file exists, we will create it
in the next section.  Note that SDC files are analyzed in the order listed, top to bottom.

		自动登录	找回密码
密码			注册

TimeQuest_User_Guide

EDA365欢迎您！

推荐内容 /1