原理图中改过的错误，PCB前标时显示还有，是怎么回事

laobei1986

原理图封装后报了两个ERROR，然后修改，再次编译、封装，两个ERROR没有了。在对PCB进行前向标志时显示未成功，查看“Forward Annotation.txt”文件，里面显示如下红字所述，和原理图封装报的错一样，明明改过了，怎么还是有呢？

3 R+ M; R' u4 {+ Z  |4 WERROR Block TOP!POWER9 Page 3, Symbol XCMP2352: The required symbol is not in the Parts DataBase.
     This is a MVT040 symbol
$ ~0 u" z. X- b, L2 y      with a reference designator U73
! ]: k" y) A, e8 l+ C9 A7 t      plus a QFN19-13.46x33.02mm Part label and a MDT040A0 Part name
. r0 q- c, w$ u5 s      using Part number MDT040A0.

. \/ t0 I4 W( O9 {9 ?
ERROR Block TOP!POWER9 Page 3, Symbol XCMP2351: The required symbol is not in the Parts DataBase.
0 K2 @9 }+ }' m1 E     This is a MVT040 symbol
) N7 v; r& i4 A. u9 e      with a reference designator U79
0 r" {# m3 N4 n- W7 d8 t      plus a QFN19-13.46x33.02mm Part label and a MDT040A0 Part name
' s, g7 ^( g) {. S      using Part number MDT040A0.


% T& i( \( Z( J: u( Q3 W+ P     2 packaging errors have been found.
) ^, K9 X& l' _      For those errors that only involve the application of wrong
      pin numbers, either repackage the schematic by hand or
      simply remove at least one pin number per reference designator
$ ?, d+ n5 O7 d% B" v/ E. q      to enable automatic packaging when you run this
      procedure again.
( s2 G3 Z/ b# T+ q

  K6 e' p( @. M9 Z; [

     DataBase Load is being terminated with 2 errors and 4197 warnings.
2 B5 @7 k+ u! t% n% o      Logic Data has NOT been Compiled.
; ]0 M9 Z. p0 X  z

hardy

The required symbol is not in the Parts DataBase看下有没有这个符号的part

9527

楼主看看这个地方是否有正确设置？
6 G+ h0 f3 B3 _

laobei1986

hardy 发表于 2014-10-8 22:12
5 U6 W; m3 c5 ]' s5 o4 K" t; QThe required symbol is not in the Parts DataBase看下有没有这个符号的part

多谢，是库没更新。
4 M) V- U5 c$ H# ?; x3 E

laobei1986

9527 发表于 2014-10-9 08:47
* y( F0 M( I1 D% W. P8 h楼主看看这个地方是否有正确设置？

多谢，是库没更新造成的。