[求助] xilinx: 普通IO能驱动MMCM吗?

h2o_freely

map的时候总是报错 ：ERROR : Place : 1155 - A clock IOB/MMCM clock component pair have been found MMCM site pair. The clock IOB component <xx>is placed at site <M22>. the corresponding MMCM component <XXX> is placed at site <MMCM_ADV_X0Y7>.The clock IO can use the fast path between the IOB and the clock manager if
a) the IOB is placed on a local clock capable IOB site in the same horizontal clock region pair as the MMCM site (fastest dedicated path),
3 U, k8 O- g! E, Hor b) the IOB is placed on a global clock capable IOB site which has a dedicated fast path to all MMCM sites.

" ~3 s3 ^% s; t+ B. F! g  q! hISE建议用 CLOCK_DEDICATED_ROUT = FALSE 来使error变为warning。
/ t. B2 \/ Y! I$ L3 q, H  ~6 T
请问，是否还有别的方法？

- o* c" C5 p' ]; V; G有的情况即时使用CLOCK_DEDICATED_ROUT = FALSE，还会出现：
physDesignRules:2053 - unsupported MMCM_ADV configuration. The signal xx on the CLKIN1 pin of MMCM_ADV comp xxx with COMPENSATION mode ZHOLD must be driven by a clock capable IOB.
3 A, S) n6 N& {9 K6 z0 s$ R
请教，这个如何解决？
4 a4 L, @6 R8 N; I因为pcb已经做好，pin的位置都固定了，没法把时钟信号重新连dao clock capable IOB的pin上了。
$ D1 I4 x  u$ n% K6 I1 n5 F; I9 v  p- }* \
谢谢