标题: 布线后规则错误－－Can't exit from pin(s)－－求解 [打印本页] 作者: zmyaction 时间: 2010-3-1 15:43 标题: 布线后规则错误－－Can't exit from pin(s)－－求解 初学，第一次尝试布局布线。layout布局后，用router自动布线，出现如下warning提示： 1 V" ^5 m7 W7 s% i4 G* z : a! q$ n b& l# {8 D Can't exit from pin(s) U1.22, U1.22 with mimimum width because of large clearance values. To correct the problem, use the Design Rules dialog box in PADS Layout or the Routing tab of the Design (or Net or Component) Properties dialog box in PADS Router.# E" a+ w: I: ^$ _ V8 U- v