allegro导入网表错误大侠们帮分析分析

rongsun1123 · 发表于 2012-9-19 11:22

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

从orcad里面导网表到allegro，出现以下错误：
(---------------------------------------------------------------------)
(                                                                   )
( Allegro Netrev Import Logic                                     )
(                                                                   )
( Drawing       : JC0047EKT2132.brd                            )
( Software Version : 16.5P002                                     )
( Date/Time       : Wed Sep 19 10:30:51 2012                   )
(                                                                   )
(---------------------------------------------------------------------)

------ Directives ------

RIPUP_ETCH FALSE;
RIPUP_DELETE_FIRST_SEGMENT FALSE;
RIPUP_RETAIN_BONDWIRE FALSE;
RIPUP_SYMBOLS ALWAYS;
Missing symbol has error FALSE;
SCHEMATIC_DIRECTORY 'F:\SPB16.5EKT2132\SCH\ALLEGRO';
BOARD_DIRECTORY 'F:/spb16.5EKT2132/SCH/allegro';
OLD_BOARD_NAME 'F:/spb16.5EKT2132/SCH/allegro/JC0047EKT2132.brd';
NEW_BOARD_NAME 'F:/spb16.5EKT2132/SCH/allegro/JC0047EKT2132.brd';

CmdLine: netrev.exe -5 -y 1 -n -i
F:\SPB16.5EKT2132\SCH\ALLEGRO
F:\spb16.5EKT2132\SCH\allegro\JC0047EKT2132.brd
F:\spb16.5EKT2132\SCH\allegro\JC0047EKT2132.brd

------
Preparing to read pst files ------

Starting to read
F:/SPB16.5EKT2132/SCH/ALLEGRO/pstchip.dat

Finished reading F:/SPB16.5EKT2132/SCH/ALLEGRO/pstchip.dat (00:00:00.10)

Starting to read F:/SPB16.5EKT2132/SCH/ALLEGRO/pstxprt.dat

Finished reading F:/SPB16.5EKT2132/SCH/ALLEGRO/pstxprt.dat (00:00:00.00)

Starting to read F:/SPB16.5EKT2132/SCH/ALLEGRO/pstxnet.dat

Finished reading F:/SPB16.5EKT2132/SCH/ALLEGRO/pstxnet.dat (00:00:00.00)

------
Oversights/Warnings/Errors ------

ERROR: File "JC0047EKT2132.brd" was locked on date "Wed Sep 19 10:28:39 2012" by
user "toshiba" on system "TOSHIBA-PC".
Resolve lock file and re-run netrev.

#1 ERROR(SPMHNI-175): Netrev error detected.

#2 Run stopped because errors were detected

netrev
run on Sep 19 10:30:51 2012

DESIGN NAME : 'EKT2132'
PACKAGING ON Apr 21 2011 10:02:30

COMPILE 'logic'
CHECK_PIN_NAMES OFF
CROSS_REFERENCE OFF

FEEDBACK OFF
INCREMENTAL OFF

INTERFACE_TYPE PHYSICAL
MAX_ERRORS 500

MERGE_MINIMUM 5
NET_NAME_CHARS '#%&()*+-./:=>?@[]^_`|'

NET_NAME_LENGTH 24
OVERSIGHTS ON
REPLACE_CHECK OFF

SINGLE_NODE_NETS ON
SPLIT_MINIMUM 0
SUPPRESS 20

WARNINGS ON

  2 errors detected
No oversight detected
No warning detected

cpu time
0:00:32
elapsed time  0:00:00

大侠们帮看看，先谢过。

rongsun1123 · 发表于 2012-9-19 11:24

自学习allegro以来，还未成功导入到网表，走过路过的各位大侠一定要帮帮忙啊

yangjinxing521 · 发表于 2012-9-19 11:27

路径没设置好，还有封装没对应上。。。

rongsun1123 · 发表于 2012-9-19 11:45

yangjinxing521 发表于 2012-9-19 11:27
8 J1 Y& O9 Q3 o% M9 q4 w. [/ r7 l路径没设置好，还有封装没对应上。。。

请帮忙看看，封装有问题是跟这个有关系吗？
在pstchip.dat里面，我自己做的一个6PIN的连接器，提示PINUSE=UNSPEC：
primitive 'CONN_6PIN_CONN_6_CONN_6PIN';
  pin
'1':
   PIN_NUMBER='(1)';
   PINUSE='UNSPEC';
'2':
   PIN_NUMBER='(2)';
   PINUSE='UNSPEC';
'3':
   PIN_NUMBER='(3)';
   PINUSE='UNSPEC';
'4':
   PIN_NUMBER='(4)';
   PINUSE='UNSPEC';
'5':
   PIN_NUMBER='(5)';
   PINUSE='UNSPEC';
'6':
   PIN_NUMBER='(6)';
   PINUSE='UNSPEC';
  end_pin;
  body
PART_NAME='CONN_6PIN';
JEDEC_TYPE='CONN_6';
VALUE='CONN_6PIN';
  end_body;

如果是，要怎么改？

yangjinxing521 · 发表于 2012-9-19 11:51

rongsun1123 发表于 2012-9-19 11:45 9 U8 v# Q, t6 x. @6 c5 A& k9 n S
请帮忙看看，封装有问题是跟这个有关系吗？5 P* W. p+ R( K4 h1 m, p% B& w
在pstchip.dat里面，我自己做的一个6PIN的连接器，提示PIN ...

PIN没有定义名字吧。。换个PIN类型试，PASSIVE...

dzkcool · 发表于 2012-9-19 13:11

错误提示：
ERROR: File "JC0047EKT2132.brd" was locked on date "Wed Sep 19 10:28:39 2012" by , S2 E0 X4 C0 p5 C5 b
user "toshiba" on system "TOSHIBA-PC".8 v* i0 W& s1 F+ _% d5 Z! m- t
Resolve lock file and re-run netrev.
说明"JC0047EKT2132.brd"文件被锁定了，要到File->Properties解锁，如果有密码还需要输入密码才能解。

rongsun1123 · 发表于 2012-9-19 16:30

自己弄了半天，情况变这样了：
直接从Orcad直接传递网表到pcb edit，就会报错中断。如果单从orcad里导出网表，再在pcb edit里面import logic，就可以导入网表和封装。不过IC的引脚方向变了，全部重叠到一起了

错乱了。。。

rongsun1123 · 发表于 2012-9-20 13:32

dzkcool 发表于 2012-9-19 13:11 ( e0 Q9 D2 B! z* n; q
错误提示：2 `% K, a" I2 R; i, \ M v. b
ERROR: File "JC0047EKT2132.brd" was locked on date "Wed Sep 19 10:28:39 2012" by , S2 E0 ...

错误提示：
ERROR: File "JC0047EKT2132.brd" was locked on date
"Thu Sep 20 13:14:53 2012" by user "toshiba" on system "TOSHIBA-PC".
Resolve lock file and re-run netrev.

按提示，是brd文件被锁定了，进入file--properties. unlock是灰色的，而且我此前没设定过密码锁定。

LOVE℃ωêi · 发表于 2012-9-21 14:13

同问！

wy408287604 · 发表于 2012-10-22 21:56

WARNING(SPMHNI-192): Device/Symbol check warning detected.

WARNING(SPMHNI-337): Unable to load symbol 'SIP2-4' for device 'CAP POL_SIP2-4_470UF': WARNING(SPMHUT-127): Could not find padstack PAD1_5D1_1.
due to ERROR(SPMHDB-274): Unable to load flash symbol F150_180_070 (Check PSMPATH setting for this symbol).
无法载入，是为什么呢

marco_ma · 发表于 2012-10-22 22:12

你做的封封闭是真FLASH或都你填了假FLASH数字，但PCB板上是没有FLASH的模板，你现在的报错是说FLASH不匹配，应该是你的SIP2-4这个封装上的焊盘出了问题，你把封装打开，看下每个焊盘的FLASH是否有问题，

蝶泪之舞 · 发表于 2012-10-24 16:04

导网表时原理图不能有半点的差错，好好检查原理图吧~~~

		自动登录	找回密码
密码			注册

allegro导入网表错误 大侠们帮分析分析

EDA365欢迎您！

推荐内容 /1

allegro导入网表错误大侠们帮分析分析