求助!急!!!关于DRC报错问题

kris_2008

请教各位高手,我在原理图进行DRC检查时出现如下错误:
5 m1 Q5 r! z; Y$ a' |ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
( N1 X: g& H3 `, @ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_MDC:  SCHEMATIC1, 03_Mac_Phy  (2.98, 4.45)
# Y# W7 C9 C& |% F; D, Y  ?ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_RXD[0..3]:  SCHEMATIC1, 03_Mac_Phy  (2.98, 2.35)
ERROR [DRC0004]   Possible pin type conflict U7,RXD1 Output Connected to Input Port:  SCHEMATIC1, 03_Mac_Phy  (6.48, 3.75)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_COL:  SCHEMATIC1, 03_Mac_Phy  (2.98, 3.55)
ERROR [DRC0004]   Possible pin type conflict U7,COL Output Connected to Input Port:  SCHEMATIC1, 03_Mac_Phy  (6.48, 4.15)
4 C) N, O; Q/ P( |ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_RX_DV:  SCHEMATIC1, 03_Mac_Phy  (2.98, 2.95)
1 ]7 \4 s6 ]! F: dERROR [DRC0004]   Possible pin type conflict U7,RX_DV Output Connected to Input Port:  SCHEMATIC1, 03_Mac_Phy  (6.48, 3.55)
- W2 O8 z" \; wERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_RX_ER:  SCHEMATIC1, 03_Mac_Phy  (2.98, 3.15)
, S% G; |" ?% ~: y3 ~ERROR [DRC0004]   Possible pin type conflict U7,RX_ER/FIBMOD Output Connected to Input Port:  SCHEMATIC1, 03_Mac_Phy  (6.48, 4.35)
; Z, r, g  v$ c( C. ~- T4 G* h% wERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_RXD[0..3]:  SCHEMATIC1, 03_Mac_Phy  (2.98, 2.35)
" h0 C2 D- s8 f
这些错误要怎么改?不知道是不是平坦式时端口连接有问题啊!急啊!

可可爱

3# datao1225

datao1225

原帖由 kris_2008 于 2008-7-3 17:09 发表
- I' D9 x6 n7 K: n! R* {8 K: W请教各位高手,我在原理图进行DRC检查时出现如下错误:
& `$ j2 K6 I' Q$ |- WERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [D ...

I think it's related to 'Port Type'.
8 ^" I4 x. F* R0 t* a( S! O) ZTry it pls.
% W$ S- c& h) ^6 ?4 d.

numbdemon

原帖由 kris_2008 于 2008-7-3 17:09 发表
请教各位高手,我在原理图进行DRC检查时出现如下错误:
5 v2 g' A8 ?8 K8 R5 x0 h* P/ cERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [D ...

如果是平坦式原理图的话 都改成offpage connector看看