高手帮忙加急

zhaoriBYR · 发表于 2008-7-27 10:53

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

DRC检查时出现的问题如下：该怎么解决啊
Dynamic shapes out of date:
7 out of 16 Current fill mode : SMOOTH
Layer = TOP State: Smooth Point on shape: (122.077 479.465) Net: AGND1
                     State: Smooth Point on shape: (2654.415 598.612) Net: GND
Layer = GND02 State: No Etch Point on shape: (1898.882 1640.000) Net: GND
                     State: Smooth Point on shape: (87.727 7585.021) Net: GND
Layer = GND04 State: Smooth Point on shape: (89.928 2343.143) Net: AGND1
                     State: No Etch Point on shape: (1898.882 1640.000) Net: GND
                     State: No Etch Point on shape: (1810.000 2320.355) Net: GND
                     State: No Etch Point on shape: (1809.762 2320.593) Net: GND
                     State: No Etch Point on shape: (1900.000 1370.784) Net: GND
                     State: No Etch Point on shape: (1426.987 2400.000) Net: GND
Layer = POWER05 State: Smooth Point on shape: (89.928 2343.143) Net: AGND1
Layer = ART06 State: Smooth Point on shape: (89.928 2343.143) Net: AGND1
Layer = GND07 State: Smooth Point on shape: (1374.929 1495.089) Net: AGND1
Layer = BOTTOM State: No Etch Point on shape: (2833.000 418.000) Net: GND
                        State: Smooth Point on shape: (77.035 486.368) Net: AGND1
                        State: Smooth Point on shape: (725.453 2355.157) Net: 5VA1