|
|
EDA365欢迎您！
您需要 登录 才可以下载或查看，没有帐号？注册
x
新焊接的板子出现以下问题，求大神解答，谢谢啦。Error connecting to the target: Error 0x00001200/-1166 Error during: OCS, Target, Lost processor clock. Device may be operating in a low-power mode. Do you want to bring it out of this mode? Sequence ID: 0 Error Code: -1166 Error Class: 0x00001200+ f9 A, r; t2 C/ c: a: p* N
Error connecting to the target: Error 0x00001020/-1166 Error during: Execution, Target, Lost processor clock. Device may be operating in a low-power mode. Do you want to bring it out of this mode? Sequence ID: 67 Error Code: -1166 Error Class: 0x000010201 q* |+ I7 l2 r8 d) v
Error connecting to the target: Error 0x00000020/-2011 Error during: Execution, TRG_ERR_CMD_DISABLED Error Occured at 0x00000000 Sequence ID: 67 Error Code: -2011 Error Class: 0x00000020
% X& _! p; P. i5 m( ]1 PEr |
|
/1 
发表于 2012-2-21 18:36
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
微信
收藏
支持！
反对！