原理图导网时出现[ALG0042]与[ALG0045]错误

pengsandy · 发表于 2011-11-2 11:53

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

请高手提点一下，这只是一部分，还有很多，不知什么问题？
[ALG0042] Duplicate Reference Designator C42: SCHEMATIC1, UART_RJ45_ALM_RTC (7.25, 4.00).
#59 Error [ALG0042] Duplicate Reference Designator C31: SCHEMATIC1, SATA_Pannel_USB (2.65, 3.80).
#60 Error [ALG0042] Duplicate Reference Designator R12: SCHEMATIC1, PHY (2.90, 1.75).
#61 Error [ALG0042] Duplicate Reference Designator C10: SCHEMATIC1, POWER (3.55, 3.85).
#62 Error [ALG0042] Duplicate Reference Designator C43: SCHEMATIC1, UART_RJ45_ALM_RTC (2.65, 4.35).
#63 Error [ALG0042] Duplicate Reference Designator R23: SCHEMATIC1, UART_RJ45_ALM_RTC (14.20, 2.35).
#64 Error [ALG0042] Duplicate Reference Designator C32: SCHEMATIC1, SATA_Pannel_USB (2.65, 3.90).
#65 Error [ALG0042] Duplicate Reference Designator C21: SCHEMATIC1, POWER (3.35, 5.25).
#66 E
rror [ALG0042] Duplicate Reference Designator C1: SCHEMATIC1, DDR CONTROLLER (2.00, 4.95).
#67 Error [ALG0042] Duplicate Reference Designator R13: SCHEMATIC1, FLASH (2.90, 6.75).
#68 Error [ALG0042] Duplicate Reference Designator C11: SCHEMATIC1, POWER (9.10, 3.85).
#69 Error [ALG0042] Duplicate Reference Designator C22: SCHEMATIC1, POWER (8.20, 5.25).
#70 Error [ALG0042] Duplicate Reference Designator C77: SCHEMATIC1, VAOUT (7.75, 10.30).
#71 Error [ALG0042] Duplicate Reference Designator C44: SCHEMATIC1, UART_RJ45_ALM_RTC (2.95, 4.35).
#72 Error [ALG0054] Conflicting number of parts per package (1) for U1: SCHEMATIC1, POWER (8.45, 1.30)
#73 Error [ALG0054] Conflicting number of parts per package (6) for U1C: SCHEMATIC1, SYSTEM POWER (9.95, 1.60)
#74 Error [ALG0045] multiple pin 1's which have different nets connected for R25: SCHEMATIC1, PHY (3.35, 4.20).
#75 Error [ALG0045] multiple pin 2's which have different nets connected for R25: SCHEMATIC1, PHY (3.35, 4.20).
#76 Error
[ALG0045] multiple pin 1's which have different nets connected for R14: SCHEMATIC1, POWER (10.60, 4.45).
#77 Error [ALG0045] multiple pin 2's which have different nets connected for R14: SCHEMATIC1, POWER (10.60, 4.45).
#78 Error [ALG0045] multiple pin 1's which have different nets connected for C23: SCHEMATIC1, POWER (8.90, 5.25).
#79 Error [ALG0045] multiple pin 2's which have different nets connected for C23: SCHEMATIC1, POWER (8.90, 5.25).
#80 Error [ALG0045] multiple pin 1's which have different nets connected for C3: SCHEMATIC1, DDR CONTROLLER (2.00, 5.65).

jacklee_47pn · 发表于 2011-11-2 13:10

[ALG0042] 原理圖裡面，有相同編號的元件。
[ALG0045] 一個元件封裝裡面，有相同的PIN。

pengsandy · 发表于 2011-11-2 20:33

处理得差不多了：还有三个问题
C:\Cadence\SPB_16.2\tools\capture\allegro.cfg

Spawning... "C:\Cadence\SPB_16.2\tools\capture\pstswp.exe" -pst -d "D:\h15c01_v120.dsn" -n "D:\allegro netlist" -c "C:\Cadence\SPB_16.2\tools\capture\allegro.cfg" -v 3 -j "PCB Footprint"
#1 Error [ALG0042] Duplicate Reference Designator U15G: SCHEMATIC1, PAGE8 (76.20, 93.98).
#2 Error [ALG0045] multiple pin B11's which have different nets connected for U15: SCHEMATIC1, PAGE8 (76.20, 93.98).
Check for incorrect packaging of all devices in U15.
#3 Aborting Netlisting... Please correct the above errors and retry.

Exiting... "C:\Cadence\SPB_16.2\tools\capture\pstswp.exe" -pst -d "D:\h15c01_v120.dsn" -n "D:\allegro netlist" -c "C:\Cadence\SPB_16.2\tools\capture\allegro.cfg" -v 3 -j "PCB Footprint"

*** Done ***
就是不让出网表，头痛

jacklee_47pn · 发表于 2011-11-2 21:02

有二個Ｕ１５Ｇ的元件，另外Ｕ１５裡面Ｂ１１的管腳有重複。

pengsandy · 发表于 2011-11-7 15:43

是的，问题己解决，谢谢

danse · 发表于 2012-6-20 23:42

pengsandy 发表于 2011-11-7 15:43 ' }2 T2 Z& C/ _
是的，问题己解决，谢谢

这个问题其实有两种情况（主要说第2种）:
1、在同一个元件里确实有两个编号相同的PIN，除了POWER引脚外。
2、一个元件里有多个子元件，一般电源引脚我们定义为POWER属性，还给他起一个PIN名，如：POWER 或GND。如果你联接的时候不是联接到网络名相同的POWER 或GND，则报错：#1 Error [ALG0045] multiple pin 3's which have different nets connected for U36: SCHEMATIC1, PMSP3_1POWER (215.90, 193.04).
Check for incorrect packaging of all devices in U36. 你只要改一下引脚步名，就可以解决了。

要学习PMSM SVPWM控制原理的朋友请一起去看看 //shop57039393.taobao.com/

indenpendence · 发表于 2012-10-18 15:38

6楼说的很好

		自动登录	找回密码
密码			注册

原理图导网时出现[ALG0042]与[ALG0045]错误

EDA365欢迎您！

推荐内容 /1