artwork出现的警告是否可以不理会(急等回复)

elmma · 发表于 2008-4-24 09:23

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

1.================================================================
   PROCESSING FILM < TOP.art > ...
================================================================
  FILM PARAMETERS :
  ---------------------------------------------------------
  Undefined line width             6.00
  Mirror code                      NONE
  Rotate angle                      NONE
  Offset x:                         0.00
  Offset y:                         0.00
  Plot negative                      NO
  Suppress unconnected internal pads  NO
WARNING: 0 width line found at (50.00 0.00)

2.FILM PARAMETERS :
  ---------------------------------------------------------
  Undefined line width             6.00
  Mirror code                      NONE
  Rotate angle                      NONE
  Offset x:                         0.00
  Offset y:                         0.00
  Plot negative                      YES
  Suppress unconnected internal pads  NO
WARNING:  Layer polarity of class ETCH subclass VCC does not
            match film polarity of Negative.  DRC may be unreliable.
如果要改正,针对以上两个警告,该怎么改正啊.谢谢回答

[ 本帖最后由 elmma 于 2008-4-24 13:12 编辑 ]

elmma · 发表于 2008-4-24 10:53

NC-drill Legend时出现一下错误,如何改正
Begin processing drill holes.
Warning : Hole 32.00-0.00-C-P-0.00-0.00 uses multiple drill figures.
Warning : Hole 38.00-0.00-C-P-0.00-0.00 uses multiple drill figures.
Warning : Hole 100.00-0.00-C-P-0.00-0.00 uses multiple drill figures.
End processing drill holes.

		自动登录	找回密码
密码			注册

artwork出现的警告是否可以不理会(急等回复)

EDA365欢迎您！

评分

推荐内容 /1