求高手指点：修改textBlock不成功

chengcheng123 · 发表于 2018-3-23 19:04

EDA365欢迎您！

您需要登录才可以下载或查看，没有帐号？注册

x

如题，想把板子上所有不是block 1的丝印都改成block 1，实际上却没有修改成功。出问题的代码如下，有高手可以帮忙看一下吗？？、
  setq(allsym axlDBGetDesign()->symbols)
  foreach(symbol allsym
            text= axlDBGetAttachedText(symbol)
            txt = nil
         foreach(find text
                        if(find->layer == "REF DES/ASSEMBLY_TOP"  then
                        txt = find
                           )
                     )
      if(txt != nil && txt->text != nil then
      println(txt->textBlock)
         if(txt->textBlock != "1" then
         println("textBlock  not eql 1")
         txt->textBlock = 1
         println(txt->textBlock)
            )
         )
            )

打印函数的位置输出如下，说明字号并未由23改成1
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"23"
"textBlock  not eql 1"
"23"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"
"1"