EDA365电子工程师网»技术社区 › 电子技术社区 › Allegro&Orcad PCB论坛 › Allegro出光绘文件前处理Undefined line width 被默认0. ...

Allegro出光绘文件前处理Undefined line width 被默认0.000

查看数: 1061 | 评论数: 8 | 收藏 0

关灯 | 提示：支持键盘翻页<-左右->

帖子模式

坏水强

发布时间: 2015-5-20 20:28

正文摘要:

[img][/img]

回复

dzkcool 发表于 2015-5-21 16:26

坏水强发表于 2015-5-21 14:10& L3 I7 q# @& I3 v( k2 d+ {+ `* i/ s
WARNING: text composed 0 width line found at (1.361 11.111)1 {" [: C, I5 S0 V
... using undefined line w ...

没有影响，已经自动改成0.152线宽了。

shipaopao 发表于 2015-5-21 16:25

采用EDA Skill中Output Tools里面的设置

2.png (20.6 KB, 下载次数: 0)

坏水强 发表于 2015-5-21 14:12

woaidashui 发表于 2015-5-21 09:16
: P9 H4 {& B! z* I! _* r( xINch单位，我们设置为5

WARNING: text composed 0 width line found at (1.361 11.111)
... using undefined line width of 0.152

WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 0.152
这类警告对出PCB板应该没有什么影响吧？

坏水强 发表于 2015-5-21 14:10

pzt648485640 发表于 2015-5-20 21:53
, F( m0 M5 h7 U- i/ c2 u7 j* Y/ W一般设置为0.05

WARNING: text composed 0 width line found at (1.361 11.111)
... using undefined line width of 0.152

WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 0.152
这类警告对出PCB板应该没有什么影响吧？

点评

dzkcool

没有影响，已经自动改成0.152线宽了。详情回复发表于 2015-5-21 16:26

仁爱 发表于 2015-5-21 11:20

这个设置是outline层的线宽，如果你板中的outline层的线宽有加粗，你这里为0也无所谓了

woaidashui 发表于 2015-5-21 09:16

INch单位，我们设置为5

点评

坏水强

WARNING: text composed 0 width line found at (1.361 11.111) ... using undefined line width of 0.152 WARNING: text having Multiple 0 width lines; all will be treated the same as the 详情回复发表于 2015-5-21 14:12

pzt648485640 发表于 2015-5-20 21:53

一般设置为0.05

点评

坏水强

WARNING: text composed 0 width line found at (1.361 11.111) ... using undefined line width of 0.152 WARNING: text having Multiple 0 width lines; all will be treated the same as the 详情回复发表于 2015-5-21 14:10