EDA365电子工程师网
标题:
Manufacture下拉NC问题请教！
[打印本页]
作者:
polo12345678901
时间:
2010-11-11 09:48
标题:
Manufacture下拉NC问题请教！
在出NC ROUTE的时候出错，有warning： WARNING: Can't find NC Route bit file (ncroutebits.txt)!
+ Y1 I f: ]1 d& H7 k
Using T01 to route ALL route cuts.
. f( {/ b$ @" C
WARNING: No route path data was found for processing.
0 Q$ \3 w2 W! m2 w, x: C
请 高手帮忙解决一下，万分感谢！
欢迎光临 EDA365电子工程师网 (http://bbs.elecnest.cn/)
Powered by Discuz! X3.2