EDA365电子工程师网

标题: ALLEGRO导入网表时错误，Exhausted maximum textblocs [打印本页]

作者: maozheng110 时间: 2010-10-29 08:58
标题: ALLEGRO导入网表时错误，Exhausted maximum textblocs

#1 ERROR(305) Device/Symbol check error detected.

Error finding symbol 'SMA-HOLE' for device 'CON1_SMA-HOLE_CON1': 'Exhausted maximum textblocs. Use env variable, preserve_symbol_textblocks or build symbols with a common Text Setup.'.

#2 ERROR(305) Device/Symbol check error detected.

Error finding symbol 'MODEL-MCU' for device 'CON36_MODEL-MCU_CON36_MCU': 'Exhausted maximum textblocs. Use env variable, preserve_symbol_textblocks or build symbols with a common Text Setup.'.

#3 ERROR(305) Device/Symbol check error detected.

Error finding symbol 'MODEL-NO-MCU' for device 'CON16_MODEL-NO-MCU_CON16': 'Exhausted maximum textblocs. Use env variable, preserve_symbol_textblocks or build symbols with a common Text Setup.'.

#1 WARNING(316) Property warning detected.

Problems with component 'C8'. Error with component property '' and value 'VOLTAGE': 'CMAX'.

#2 WARNING(316) Property warning detected.

Problems with component 'C7'. Error with component property '' and value 'VOLTAGE': 'CMAX'.

#3 WARNING(316) Property warning detected.

Problems with component 'C5'. Error with component property '' and value 'VOLTAGE': 'CMAX'.

#4 WARNING(316) Property warning detected.

Problems with component 'C28'. Error with component property '' and value 'VOLTAGE': 'CMAX'.

#5 WARNING(316) Property warning detected.

Problems with component 'C25'. Error with component property '' and value 'VOLTAGE': 'CMAX'

dra.zip (11.21 KB, 下载次数: 9) .

作者: maozheng110 时间: 2010-10-29 08:59
郁闷了一天了，请高手指教啊

作者: hujzh888 时间: 2010-11-3 11:48
红色ERROR,可能是在放RefDes时用的太长。试用M?看看。如果是要标这么长的名称就用Device_Type.

作者: hujzh888 时间: 2010-11-3 12:15

hujzh888 发表于 2010-11-3 11:48
5 r& e6 ?2 A+ {红色ERROR,可能是在放RefDes时用的太长。试用M?看看。如果是要标这么长的名称就用Device_Type.

与前原理图相同用“CON? ”。

作者: maozheng110 时间: 2010-11-5 09:26
是设置的问题，我重建了个BORD就好了

欢迎光临 EDA365电子工程师网 (http://bbs.elecnest.cn/)